Application
Bolt-in housing for 2005-2014 Mustang
Description
Strange HD Ford 9″ housing
With upper & lower control arm mounts and housing ends
Custom widths available at no additional charge
Note
Upper mount is moved forward .400″ and upward .400″
Aftermarket adjustable upper control arm must be used
Pinion offset is .125″ to passenger side
Information Required
Housing width
Type of housing ends
Center Housing – H1112 *
• Constructed from .141″ mild steel
• Heavy duty .282″ thick face plate
• Internal gussets provide rigidity and support axle tubes
• Slots allow exceptional weld contact of housing to tubes
• Extended cover provides clearance for 9″ & 9 1/2″ gear sets
* Modified for this application
Fill & Drain plugs – H1116 / H1117D
• Facilitate fluid changes
• Allows for inspection of ring gear
Housing Tubing – H1141
• DOM 1026 steel
• 3.250″ OD x .250″ wall thickness
Vent – H1112B
• Prevents build-up of internal pressure
• Ensures sealing integrity
2005-2014 Mustang Mounts
• Strange HD upper control arm mount
• Lower control arm mounts
• Spring mounts
• Shock mounts
• Panhard bar mount
• Bump stop mounts
Choice of Housing Ends – H1148 / H1137
• Forged chrome moly
• Accept 3.150″ bearings
• Other Strange housing ends are also available
Professionally Welded
• Jig welded to ensure proper alignment
• Tubes internally & externally welded to housing
• Provides maximum support & rigidity
